Collacryl K190 UV

Be the first to review this product

Curing adhesive, viscous, transparent, curing on exposure to UV light.
Continue >>

Availability: In stock

Excl. Tax: €33.93 Incl. Tax: €41.39

Product Description


Curing adhesive, viscous, transparent, curing on exposure to UV light. Contains polymethylmethacrylate in methyl methacrylate. 250 ml. Use Suitable for bonding joints and surfaces for all types of clear Plexiglass (PMMA) is not cured, also applicable to PS, PC, PVC, CAB transparent; run preliminary tests. Processing Before the 'bonding surfaces should be cleaned with detergent DCL 80. You can reduce the formation of bubbles of the edges sawn or milled smooth with 400-600 grit sandpaper and rubbed with a cloth dampened with thinner K 90. In pieces with any residual stresses previously run a temperature (2-4 hours at 70-80 ° C). The bonding surfaces must fit together precisely, apply with a syringe or nozzle (PE, PP, PA no PVC, container preferably dark) hold the pair for several minutes with light pressure (100 g / cm2) to strengthen the bonding. KM can be diluted with thinner. Expose the bonding of appropriate light source until the 'hardening. (UV sunbed use neon tubes) Do not instill it in closed cavities (REAR, pipes, etc..) Worsens because the hardening with possible formation of cracks on the pieces to be bonded. The cleaning equipment and containers can be made with thinner or K 90 KM. Once opened must be used within 10 min because its composition is altered by evaporation. It should be stored at room temperature (18 - 20 ° C) before the 'use. Characteristic values Brookfield Viscosity (20 ° C) from 1600 to 1800 mPa.s Density (20 ° C) @ 1.00 g/cm3 Color clear / yellowish and the color does not affect the 'bonding Refractive index 1.42 @ Tensile strength from 25 to 28 MPa 30 MPa with temperatures of 80 ° C 5h Pot - life 120 min in ambient light diffuse Storage 1 year stored properly. Storage Keep container closed in a cool, max at 25 ° C to keep in the refrigerator for safety Protect from light Packaging tin box (6 x 1 liter) Curing type illumination time at 20 ° C and 20 cm from lamp Solar UVA (Sunbed) 15 min UVA: 315 - 390 nm UVA flux: 42 W - 23 mW / cm Notes More information about the security measures and disposal are given in MSDS. The techniques above do not have the character of warranty. The 'customer is responsible for' use, the card data are indicative and modifiable. In pezzi con eventuali tensioni residue eseguire preventivamente una tempera ( 2-4 ore a 70-80 °C). Le superfici da incollare devono combaciare con precisione, applicare con siringa o beccuccio ( PE, PP, PA no PVC, preferibile contenitore scuro ) tenere fermo l’accoppiamento per alcuni minuti con leggera pressione ( 100 g / cm2 ) per consolidare l’incollaggio. Può esser diluita con diluente KM. Esporre l’incollaggio a fonte di luce adatta fino all’ indurimento. (Utilizzare Tubi neon UV SUNBED ) Non farla penetrare in cavità chiuse ( retrocamere, tubi ecc.) perché peggiora sensibilmente l’indurimento con possibile formazione di fessurazioni sui pezzi da incollare. La pulizia di attrezzi e contenitori può essere eseguita con diluente K 90 o KM. Una volta aperta va usata entro 10 min perché la sua composizione si altera per evaporazione. Il prodotto va conservato a temperatura ambiente ( 18 – 20°C ) prima dell’ uso. Valori caratteristici Viscosità Brookfield (20°C) 1600 – 1800 mPa.s Densità (20°C) @ 1,00 g/cm3 Colore incolore/giallognola; il colore non pregiudica l’ incollaggio Indice rifrazione @ 1,42 Resistenza a trazione 25 – 28 MPa 30 MPa con tempera di 5h a 80°C Pot – life 120 min in luce ambiente diffusa Stoccaggio 1 anno conservata correttamente. Conservazione tenere chiuso il contenitore, in ambiente fresco, max a 25°C- tenere in frigorifero per maggior sicurezza Conservare al riparo dalla luce Imballo lattina ( scatola : 6 x 1 litro ) Indurimento tipo illuminazione Tempo a 20°C e 20 cm da lampada UVA solare ( Sunbed ) 15 min UVA : 315 – 390 nm UVA flux : 42 W – 23 mW/cmq Note Altre informazioni relative le misure di sicurezza ed eliminazione dei residui sono indicate nella scheda di sicurezza. Le tecniche di utilizzo indicate non hanno carattere di garanzia. L’ utilizzatore è responsabile dell’ uso, i dati della scheda sono indicativi e modificabili.

Additional Information

Additional Information

SKU K151


Write Your Own Review

You're reviewing: Collacryl K190 UV

Product Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.